Maintaining an Intex above ground pool is essential to ensure it continues to provide enjoyable moments for you and your family. One crucial task is draining the pool when required. Draining not only helps remove impurities, but also allows for thorough cleaning and proper winterization. In this article, we will guide you through the simple steps to drain your Intex above ground pool.
Step 1: Ensure Safety Precautions
Prior to draining your pool, take the necessary safety precautions to avoid any accidents or injuries:
- Turn off the power supply to any pool equipment such as pumps or filters.
- Put on gloves and protective clothing to avoid direct contact with chemicals.
- Keep children and pets away from the pool area.
Credit: www.amazon.com
Step 2: Select the Drainage Method
Intex above ground pools offer different drainage methods. The suitable method for your pool depends on the specific model you have:
Pool Type | Drainage Method |
---|---|
Easy Set Pools | Attach a garden hose to the drain valve and direct it to a suitable drainage area. |
Frame Set Pools | Allow the water to drain from the drain plug located at the bottom of the pool. |
Ultra Frame Pools | Connect a hose to the drain plug and direct it to a drainage location. |
Identify the method based on your pool type and gather the necessary equipment.
Step 3: Gather Drainage Equipment
It’s important to have the right tools and equipment at hand to ensure a smooth draining process. Here’s what you’ll need:
- A garden hose with suitable length.
- A submersible pump or a pool vacuum (if needed).
- An adjustable wrench (if applicable).
- A water source for refilling the pool (if desired).
Step 4: Begin Draining the Pool
Now it’s time to start draining your Intex above ground pool. Follow these steps:
- Attach the garden hose to the drain valve or plug.
- If using a submersible pump or pool vacuum, ensure it is properly set up and positioned to effectively remove the water.
- Slowly open the drain valve or remove the plug, allowing the water to flow out.
- Monitor the drainage process to ensure smooth and continuous flow.
- Keep an eye on the pool walls to check for any signs of collapsing or damage during the drainage.
Credit: m.youtube.com
Step 5: Cleaning and Winterization
While the pool is draining, take the opportunity to clean and prepare it for winterization:
- Remove any debris or leaves using a pool net.
- Scrub the pool’s walls and floor using a pool brush or a suitable cleaning tool.
- Test the pool water for pH levels and adjust if necessary.
- Once drained, dry the pool completely to prevent any moisture-related issues during winter.
- If winterizing, cover the pool with a suitable pool cover to protect it from debris and harsh weather conditions.
Step 6: Refill the Pool
In case you’re planning to refill your pool after draining, follow these steps:
- Close the drain valve or plug.
- Detach the garden hose from the drain valve.
- Securely attach the hose to the water source.
- Slowly open the water source and allow the water to flow into the pool.
- Monitor the water level and ensure it doesn’t exceed the recommended level for your pool.
Congratulations! You have successfully drained your Intex above ground pool and prepared it for cleaning, winterization, or refilling. Remember, proper maintenance is crucial for the longevity and enjoyment of your pool, so regular draining should be part of your pool care routine.