Changing the filter in your Bestway pool is an essential maintenance task that helps keep your pool water clean and clear. However, many pool owners are concerned about losing water during the filter change process. The good news is that it is possible to change the Bestway pool filter without losing water if you follow the right steps. In this article, we will guide you through the process of changing the Bestway pool filter without any water loss.
Credit: www.emeraldpoolandspa.com
Step-by-Step Guide to Changing Bestway Pool Filter Without Losing Water
Follow these simple steps to change the Bestway pool filter without losing water:
Step 1: Turn Off The Pump
Before you start the filter change process, make sure to turn off the pump to stop the water flow. This will prevent water from draining out of the pool when you remove the filter.
Step 2: Close The Valves
Next, close the valves on both the suction and return lines to isolate the filter system. This will help maintain the water level in the pool during the filter change.
Step 3: Prepare The New Filter
Prepare the new filter by removing it from the packaging and inspecting it for any damage. Make sure the new filter is compatible with your Bestway pool model before proceeding.
Step 4: Remove The Old Filter
Once the pump is turned off and the valves are closed, you can safely remove the old filter from the filter housing. Be careful not to tilt the filter to avoid any water spillage.
Step 5: Install The New Filter
Install the new filter in the filter housing according to the manufacturer’s instructions. Make sure it is securely in place to prevent any water leaks once the pump is turned back on.
Step 6: Open The Valves And Turn On The Pump
After the new filter is installed, open the valves on the suction and return lines and turn on the pump. This will allow water to flow through the new filter without losing any water from the pool.
Step 7: Check For Leaks
Once the pump is running, check the filter system for any leaks. If you notice any leaks, turn off the pump immediately and tighten the connections to stop the leakage.
Step 8: Monitor The Water Level
Monitor the water level in the pool after the filter change to ensure that it remains consistent. If you notice any significant water loss, check for leaks in the filter system and address them promptly.
Credit: m.youtube.com
Tips for Maintaining Your Bestway Pool Filter
Here are some tips to help you maintain your Bestway pool filter and prolong its lifespan:
- Regularly clean the filter to prevent clogging and ensure optimal filtration efficiency.
- Check the pressure gauge on the filter system regularly and backwash the filter when the pressure rises above the recommended level.
- Inspect the filter housing for any cracks or damage and replace it if necessary to prevent water leaks.
- Use a pool cover when the pool is not in use to reduce debris and prolong the life of the filter.
- Consider investing in a filter cleaner to deep clean the filter and remove any built-up dirt and debris.
Conclusion
Changing the Bestway pool filter without losing water is a simple process that can be easily accomplished by following the steps outlined in this guide. By taking the necessary precautions and following the recommended maintenance tips, you can ensure that your Bestway pool filter functions efficiently and keeps your pool water clean and clear throughout the swimming season.
