How to Blow Out Lines in Inground Pool: Easy Steps & Tips

Natural Pond Cleaner
How to Blow Out Lines in Inground Pool

Welcome to our guide on how to blow out lines in your inground pool. Properly winterizing your pool is essential to protect it from potential damage caused by freezing temperatures. One crucial step in this process is blowing out the lines to prevent water from freezing and causing costly repairs. In this article, we will walk you through the steps to effectively blow out lines in your inground pool.

How to Blow Out Lines in Inground Pool: Easy Steps & Tips

Credit: m.youtube.com

Materials Needed:

  • Air Compressor
  • Air Hose
  • Plugs or Gizzmos for Skimmers
  • Plugs for Return Lines
  • Thread Seal Tape
  • Pool Antifreeze (Optional)

Step-by-Step Guide:

Follow these steps to successfully blow out lines in your inground pool:

Step 1: Prepare Your Equipment

Gather all the necessary materials listed above. Make sure your air compressor is in good working condition and that you have the correct fittings to connect the air hose to your pool’s plumbing lines.

Step 2: Drain The Pool

Before blowing out the lines, ensure that the pool water level is below the skimmer opening. This will prevent any remaining water from entering the lines during the process.

Step 3: Plug Skimmers

Insert plugs or gizzmos into the skimmer openings to seal them off. This will prevent air from escaping during the blowing out process.

Step 4: Plug Return Lines

Use plugs to seal off the return lines where water flows back into the pool. Make sure all return lines are securely plugged to prevent any water from re-entering the system.

Step 5: Connect The Air Compressor

Attach the air hose from the compressor to the plumbing lines of the pool. Ensure a secure connection to prevent air leaks.

Step 6: Blow Out The Lines

Turn on the air compressor and gradually increase the pressure to blow out the lines. Start with low pressure and gradually increase it to avoid damaging the plumbing system.

Step 7: Check For Bubbles

Monitor the return lines for any air bubbles. Once you see a steady stream of air bubbles, continue blowing out the lines for a few more minutes to ensure all water is expelled.

Step 8: Add Antifreeze (optional)

If you live in an area with extremely cold temperatures, consider adding pool antifreeze to the lines for extra protection. Follow the manufacturer’s instructions for proper usage.

Step 9: Seal The Lines

After blowing out the lines, remove the air compressor and securely seal all openings with plugs or caps to prevent any debris or critters from entering the plumbing system.

Step 10: Cover The Pool

Once the lines are properly blown out and sealed, cover your pool with a winter cover to protect it from debris and harsh weather conditions.

How to Blow Out Lines in Inground Pool: Easy Steps & Tips

Credit: www.lathampool.com

Conclusion

Blowing out lines in your inground pool is a crucial step in winterizing your pool and protecting it from potential damage. By following the steps outlined in this guide and using the right equipment, you can ensure that your pool remains in top condition during the winter months. Remember to consult a professional if you are unsure about any step in the process. Stay proactive in maintaining your pool to enjoy a hassle-free swimming season next year!

Spread the love

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published. Required fields are marked *